Disclaimers

This page contains important disclaimers regarding Tereda Software LLC's products and services. Please read these disclaimers carefully before using any of our applications or services.

1. General Disclaimer

The information provided through Tereda Software's applications, websites, and services (collectively, "Services") is for general informational and reference purposes only. While we strive to provide accurate and up-to-date information, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability, or availability of the information, products, services, or related graphics contained in our Services.

Any reliance you place on information from our Services is strictly at your own risk.

2. ZAFTO Electrical Application Disclaimer

2.1 Reference Tool Only

ZAFTO Electrical is a reference application only. It is designed to provide quick access to electrical calculations, code references, wiring diagrams, and related information. ZAFTO is NOT:

• A replacement for the National Electrical Code (NEC) codebook;
• A substitute for professional electrical training or education;
• A replacement for engineering calculations by licensed professionals;
• A substitute for local code compliance verification;
• A replacement for inspections by the Authority Having Jurisdiction (AHJ);
• A professional engineering or design tool;
• A safety device or safety verification system.

2.2 Code Compliance Disclaimer

IMPORTANT: The National Electrical Code (NEC) is adopted differently by each state, county, municipality, and jurisdiction. Many jurisdictions adopt specific versions of the NEC (not necessarily the latest version) and may include local amendments that modify requirements.

Information in ZAFTO is based on the NEC 2026 standard unless otherwise noted. Your jurisdiction may use a different code version and may have additional requirements not reflected in our application. Always verify all requirements with your local Authority Having Jurisdiction (AHJ) before performing any electrical work.

2.3 Calculation Accuracy Disclaimer

While we have made reasonable efforts to ensure the accuracy of calculations in ZAFTO, all calculations should be independently verified before use. Calculation results are provided for reference purposes only and should not be used as the sole basis for design decisions, material selection, or installation practices.

Users are responsible for:

• Verifying all calculations against authoritative sources;
• Ensuring input values are correct and appropriate;
• Understanding the limitations and assumptions of each calculation;
• Applying appropriate safety factors and professional judgment;
• Confirming results with the applicable code book.

2.4 Wiring Diagrams Disclaimer

Wiring diagrams in ZAFTO are provided for educational and reference purposes only. They represent typical configurations and may not reflect:

• Local code requirements or amendments;
• Specific manufacturer requirements;
• Site-specific conditions or requirements;
• All possible configurations or variations;
• Requirements for specific equipment or installations.

Always consult manufacturer instructions, local codes, and qualified professionals when planning electrical installations.

2.5 Phone Sensor Tools Disclaimer

Any sensor-based tools in ZAFTO (such as stud finders, EMF detectors, or level tools) use your phone's built-in sensors and are provided for convenience only. These tools are:

• NOT calibrated precision instruments;
• NOT safety devices;
• NOT replacements for professional-grade tools;
• NOT to be relied upon for safety-critical decisions.

Never rely on phone-based sensor tools to determine whether electrical circuits are energized. Always use properly rated test equipment (such as a non-contact voltage tester or multimeter) and follow appropriate safety procedures.

3. No Professional Advice

Nothing contained in our Services constitutes professional advice of any kind, including but not limited to:

• Electrical engineering advice;
• Professional electrical contracting advice;
• Legal advice;
• Safety advice;
• Building code consultation.

For specific advice regarding your particular situation, consult with appropriately licensed professionals.

4. No Warranty

Our Services are provided on an "AS IS" and "AS AVAILABLE" basis without any warranties of any kind. To the fullest extent permitted by law, Tereda Software LLC disclaims all warranties, express or implied, including but not limited to:

• Implied warranties of merchantability;
• Fitness for a particular purpose;
• Non-infringement;
• Accuracy or completeness of information;
• Uninterrupted or error-free operation;
• Compatibility with any specific devices or systems.

5. Limitation of Liability

IN NO EVENT SHALL TEREDA SOFTWARE LLC, ITS OFFICERS, DIRECTORS, EMPLOYEES, AGENTS, OR AFFILIATES BE LIABLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO:

• Direct, indirect, incidental, special, consequential, or punitive damages;
• Personal injury or property damage;
• Lost profits or business interruption;
• Damages arising from electrical work performed based on information from our Services;
• Damages arising from reliance on calculations or references in our Services;
• Damages arising from code violations or inspection failures;
• Any other damages arising from your use of our Services.

This limitation of liability applies regardless of the legal theory under which damages are sought, whether in contract, tort (including negligence), strict liability, or otherwise.

6. User Responsibility

By using our Services, you acknowledge and agree that:

• You are solely responsible for any electrical work you perform;
• You will verify all information against authoritative sources;
• You will comply with all applicable laws, codes, and regulations;
• You will obtain all required permits and inspections;
• You will follow all safety procedures and use appropriate personal protective equipment;
• You will not hold Tereda Software LLC liable for any damages arising from your use of our Services.

7. Third-Party Content

Our Services may reference third-party standards, codes, or materials (such as the NEC published by the National Fire Protection Association). References to such standards are for informational purposes only. We are not affiliated with, endorsed by, or otherwise associated with the publishers of these standards unless explicitly stated. Always refer to the official published versions of any standards or codes.

8. Changes to Information

Electrical codes, standards, and best practices change over time. While we endeavor to keep our Services current, information may become outdated between updates. Users are responsible for verifying that information is current and applicable to their situation.

9. Indemnification

You agree to indemnify, defend, and hold harmless Tereda Software LLC and its officers, directors, employees, agents, and affiliates from and against any and all claims, damages, losses, liabilities, costs, and expenses (including reasonable attorneys' fees) arising from or related to:

• Your use of our Services;
• Any electrical work you perform;
• Your violation of these Disclaimers or our Terms of Service;
• Your violation of any applicable law, code, or regulation;
• Any claim that your use of our Services caused injury or damage to any person or property.

10. Acknowledgment

By using our Services, you acknowledge that you have read, understood, and agree to be bound by these Disclaimers. If you do not agree with these Disclaimers, you must not use our Services.

11. Contact Us

If you have any questions about these Disclaimers, please contact us at:

Tereda Software LLC
Email: contact@teredasoftware.com